HMF Adds Exhaust and Bumpers for the 2027 Kawasaki Teryx H2: With Video
Story and photos: HMF Racing
www.hmfracing.com
Kawasaki dropped a 2-seat Teryx H2 for 2027. We already built for it.
Front bumpers, rear bumper, winch mount, hitch, and the Mid Exhaust all fit the new 2-seat and the Teryx 4 and 5 H2. Pick your setup and get riding.
HMF exhaust and equipment for the 2027 Kawasaki Teryx H2. Photo: HMF Racing.
HMF Teryx H2 Mid Exhaust
The stock center section chokes the H2. Ours swaps in a high-pressure stainless chamber that HMF claims is good for up to 13 more horsepower. It kills the low-speed drone too. Loud when you want it, smooth when you’re cruising.
Stainless or Blackout. Fits the 2027 Teryx H2 and 2026–2027 Teryx 4/5 H2.
HMF Mid Exhaust for the Kawasaki Teryx H2
The Mid Exhaust uses high-pressure stainless steel construction and is TIG welded in the USA. HMF says fuel tuning is typically not required unless other modifications require it. Listed price: $499.95.
HMF Mid Exhaust details. Photo: HMF Racing.
HMF Teryx H2 U4 Front Bumper
The heavy hitter. The high-mounted winch plate keeps your winch out of the mud, built for most winches up to 6,500 lb. Mandrel-bent .095” steel tubing, 4-point mount, works with OEM and most aftermarket skid plates.
The U4 uses a 6-inch fairlead bolt pattern and retains compatibility with the OEM tow hook. Front-camera-equipped machines require camera relocation. Listed price: $439.95.
HMF U4 Front Bumper with high-mounted winch plate. Photo: HMF Racing.
LT Front Bumper
Protection without the weight. A built-in mount takes a 10” light bar or dual 4” cubes, and the aluminum skid plate covers what the stock plastic won’t.
Want a winch? Add the XD Winch Mount and run it in the stock location. Fairlead or no fairlead.
The LT combines .095-inch DOM steel tubing, 11-gauge steel and a 3/16-inch aluminum skid plate. Winch and non-winch versions are available. HMF notes that front cameras require relocation and roller fairleads are not compatible. Listed price: $349.95.
HMF LT Front Bumper and aluminum skid plate. Photo: HMF Racing.
Rear Bumper
Heavy-duty .095” DOM steel that bolts to the frame without adding a bunch of length. Your OEM tow hook still works and the camera stays clear. Pairs with the HD Hitch Receiver.
The design leaves suspension bolts accessible and is compatible with the HMF hitch receiver. Listed price: $399.95.
HMF Rear Bumper for the Kawasaki Teryx H2. Photo: HMF Racing.
Tree Kickers
Trees don’t care about your side panels. Tree Kickers do. Heavy-duty .095” steel with a Traction-Grip tooth step so you’re not slipping getting in and out. Mounts to the stock frame locations.
Fits the Teryx 4 and 5 H2 only. Not the new 2-seat.
HMF Tree Kickers fit Teryx 4 and 5 H2 models only. Photo: HMF Racing.
Winch, Mount & Hitch
Start with the winch. HMF XD Winch Kits come ready to pull: winch, 50’ synthetic rope, wireless remote, and an illuminated dash switch, all in the box. Run the XD4500 or step up to the XD6000.
XD Winch Mount puts the wide-spool XD4500 in the stock location behind the LT Front Bumper.
HD Hitch Receiver is a 2” receiver in 3/16” and 1/4” steel that reinforces the suspension mounts. Works with the HMF Rear Bumper or stock.
The XD Winch Mount uses a 6-inch fairlead mounting pattern and is designed for wide-spool 4,500-pound winches. Listed price: $99.95. The HD 2-inch Hitch Receiver is listed at $119.95.
HMF winch installation on the Kawasaki Teryx H2. Photo: HMF Racing.
For more information, visit HMF Racing.
Related Stories
More New Side-by-Side Products
2027 Kawasaki Teryx H2 Two-Seat Test Review
Related Posts
HMF Launches LED Off-Road Lights for Side-by-Sides: With Video →
2027 Kawasaki TERYX H2 Test Review →
